12kv indoor Ring Main Unit-reliable Indoor Power Distribution Choice

12kv indoor Ring Main Unit-reliable Indoor Power Distribution Choice

Details
Rated Voltage:10kV 35kV
Rated Current:630A 1250A
Short-Circuit Breaking Capacity:25kA 31.5kA
Protection Level:IP44 IP54
Insulation Medium:SF6 gas/Epoxy resin
Switching Device:Vacuum load switch/SF6 load switch
Frequency:50Hz 60Hz
Category
Ring Main Unit
Share to
Send Inquiry
Description
Technical Parameters

Products Description

product-702-527
Product Introduction

 

This 12kv indoor Ring Main unit is our solution to the specific challenges of indoor medium voltage power distribution. Its design is suitable for small spaces and provides solid and reliable performance even under harsh conditions. You can find it in office buildings, precision electronic equipment factories, hospitals, refurbished old buildings, and underground substations-any place with limited space, high humidity, and strict safety standards. With its reliable operation, user-friendly design and low daily operating costs, it is very suitable for buyers around the world looking for a practical indoor MV solution.

Products Features

 

 

 

1

Moisture-proof & stable insulation​

 

The cabinet is completely sealed and equipped with a moisture-proof insulation system. Internally, we use VPI-treated Nomex insulation paper, which is rated for F-level thermal durability. This means that even if the humidity rises to 95%, the insulation can remain reliable. From -25℃ to 40℃, the device keeps working without moisture-related failures.

Fire safety you can trust​

 

It is completely oil-free, made of flame-retardant materials, and has UL94V-0 certification. It complies with the standards IEC60694 and GB50054-2011. A dedicated fire-fighting connection interface allows it to be directly connected to your building's fire-fighting system, so the inspection runs smoothly without the need for additional protection devices.

5
4

Efficiency leap Precision and stability

 

Compared with national standards, no-load loss is reduced by 20% and load loss is reduced by 15%, which is in line with DOE2 energy efficiency. Take the 1000kVA model for example: it can save about 12,000 yuan in electricity bills every year. Since the working noise is kept below 55 decibels, there is no need to increase the sound insulation function, which helps to reduce the overall cost.

Space-saving and easy to maintain​

 

At only 600 mm deep, the modular, ultra-thin design saves about 30% of the space required for traditional units. It can be installed on the wall or wired before installation. If a module fails, it can be replaced within 30 minutes. A clear status window allows you to instantly view the operation of things, making maintenance simple.

2
modular-1

Intelligent monitoring and customized services​

 

A built-in intelligent system observes the temperature and local discharge in real time, and if there are any problems, it sends a remote alarm via RS485. We also adjust the equipment according to the specific needs of your project, provide support from initial planning to after-sales service, and a 2-year peace of mind warranty.

 

 

Project Parameter
Load Switchgear (C) Combined Elecctric Cabinet (F) Circuit Breaker Cabinet(V)
Rated Voltage 12kV
Rated Frequency 50HZ
Rated Current 630A 1250A (Depends on Fuse Current) 630A/1250A
Rated Transfer Current / 1750A /
Cable Charging Break Current 40A 25A
No-load Transformer Breaking Current 16A 16A
1 mimute Power
Frequency Voltage Withstand
Interphase with and against the ground 42kV
Fracture 48kV
Lighting Shock Withstand Voltage Interphase with and against the ground 75kV
Fracture 85kV
Mechanical Life The Main Switch ≥5000 times ≥10000 times
Grounding Switch ≥3000 times
Main Circuit Resistance ≤120μΩ ≤400μΩ ≤200μΩ
SF6 Gas Pressure Rating (20℃) 0.035MPa
Annual Leakage Rate of SF6 Gas 0.01%
Rated Power Supply Voltage of Secondary Loop AC220V/DC110/DC48V/DC24V
1 minute Power Frequency withstand Voltage of Secondary Loop 2kV
Protection Grade Aeration Tank IP67
Shell and Operating Mechanism IP4X

Hot Tags: 12kv indoor Ring Main Unit-reliable Indoor Power Distribution Choice, China 12kv indoor Ring Main Unit-reliable Indoor Power Distribution Choice manufacturers, suppliers, factory, hv rmu, Environmentally Friendly Gas Insulated Ring Main Unit, 3 phase ring main, Outdoor Ring Main Unit, 13 8 kv ring main unit, 33kv ring main unit

Send Inquiry
Contact us if have any question

You can either contact us via phone, email or online form below. Our specialist will contact you back shortly.

Contact now!