-
Resin Bonded TransformersRated frequency 50 Hz/60 HZread more
Three-phase
Energy saving effect is significant
Can operate in 100% wet environment without preheating treatment
Winding deformation rate <1.5%... -
Distribution Dry Type TransformersOver 100,000 hours of average trouble-free operationread more
Load Loss Optimized 10%~15%
Built-in all kinds of sensors for remote monitoring
OEM/ODM -
Dry-type Distribution Transformerdry type distribution transformer It is the core equipment in the power distribution system, mainly used to convert 10kV or 35kV medium voltage to 230/400V low voltage electricity for users to...read more
-
Compact TransformersCooling Method ANAFread more
40% increase in space utilization
30% weight reduction
Shell material is aluminum alloy, steel plate, stainless steel
The winding can be made of... -
Insulated TransformersRated frequency 50 Hz/60 HZread more
Three-phase or single-phase
Excellent performance in energy saving
Strong sealing performance
Installed with smart components -
Epoxy Resin TransformersMaintenance-freeread more
Impact and moisture resistance
Smart temperature monitoring and protection
The winding can be made of copper or aluminum
Shell material is aluminum alloy,... -
Non Oil Transformers•Model:SCB10 / SCB11 / SCB12 / SCB13 / SCB14 / SCB18read more
•Rated Capacity: 100–3150 kVA
•Voltage Rating: 6–35 kV / 0.4 kV
•Cooling Method: AN / AF
•Winding Material: Copper /... -
Cast Resin Transformers•Model:SCB10 / SCB11 / SCB12 / SCB13 / SCB14 / SCB18read more
•Rated Capacity: 100–3150 kVA
•Voltage Rating: 6–35 kV / 0.4 kV
•Cooling Method: AN / AF
•Winding Material: Copper /... -
Air Cooled Transformers•Model:SCB10 / SCB11 / SCB12 / SCB13 / SCB14 / SCB18 •Rated Capacity: 100–3150 kVA •Voltage Rating: 6–35 kV / 0.4 kV •Cooling Method: AN / AF •Winding Material: Copper / Aluminum •Standard:...read more
Low Voltage Dry Type Non-Ventilated Transformers Totally Enclosed, Non-Ventilated (TENV) TENV transformers are recommended where dust, dirt, or lint may be present or where...
Drive Isolation Transformer (DIT) is designed to specifically handle the mechanical stresses, voltage distortions, and harmonics associated with silicon-controlled rectifiers (SCR)...
Transformers Rated 600 V and below Eaton’s single-phase and three-phase general purpose dry-type ventilated transformers are of the two-winding type, self-cooled, and are available in a...
Dry Type Isolation Transformer. Dry Type Isolation. We make 3-Ø and 1-Ø Dry Type Isolation transformers up to 500kVA. Voltage rating we follow are normally 415/415, which the customer can specify any...
Dry type transformers insulated with Nomex® can be designed with a temperature rise up to 150K, requiring less conductor and core steel, which can result in a lower initial cost. The...
Dry type transformer are non-explosive fire resistant, air insulated, and are cooled by natural circulation of air through ducts provide in the windings....
